I've posted a few notes on my ongoing problems witm the ignition . I'm wondering if there is a way to check the computer brain for the ignition with a volt/ohm meter? also how do install another ground harnes/strap? what do I ground and where. It seems like I've replaced everything in the ignition system and checked all the electric connectors so maybe anothe ground might work. When the engine is running it works just fine-it purrs, but intermittently it just dies-no sputters, no hiccups, no backfires it just dies like I've turned the key off. anyway if you could help me with the above questions it would be appreciated. thanks, RUDY B SANTA ROSA CA 84 WATERBOX, 80 AIRCOOLED
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.