In a message dated 96-12-20 10:56:12 EST, m.radtke@elm.az05.bull.com (Michael A. Radtke) writes: > They will also tell you that it can't be installed > in your van. The reason for this is that the engine, battery, and > dashboard are all in the wrong places. The solution is simply to extend > the control wiring cable. This is not a big deal if you are comfortable > with splicing wires. I can confirm this. Before buying Zemco units for my (and a friends) 87 Vanagons, I called Zemco and they confirmed that there was no problem. I spliced in a 15' or so cable to get from the "smarts" & servo in the engine compartment to the control switches for the driver. Jim Davis 87 GL Syncro 88 GL Wolfsburg
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.