Turner,Ronald L. wrote: > > Let's try this again.... Has anybody out there removed Power mirrors off a > Vanagon? > I'll explain it better this time. > the wires that come out of the mirror go thru a hole in the door. > the hole in the door is not big enough to allow the plastic wire connectors to > pass thru. Is there any way I can remove the wires from the plastic wire > connectors (the're sort of in there permanently) or do I have to break the > plastic wire connector? Is the connector something that you can buy by itself, > or not? Bentley is no help. > > As I write this , I'm in the middle of trying to do this, that's why the > frustration and impatience.... :<( > > Any help would be appreciated.. > Joel, didn't you install power mirrors on your van?? > > TIA, > chris Chris, You should be able to stick a jewlers flat srewdriver into the plastic plug at each of the terminals to release each wire. Each connector is held in by a clip that's part of the connector. You should be able to see the clip by looking directly into the plug. Hotch 86 GL Philly
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.