Date:         Sun, 05 Jan 1997 10:47:45 -0600
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Neal R. Denison, Jr." <denison@arn.net>
Subject:      Re: Coolant under rear bench carpet

Victor,
The heater has a plastic bleeder screw that fails.  As long as you have
a mess you might want to start it up and visual verify what's leaking. 
I super glued the bleeder screw back together while the replacement was
enroute.  I had to clean up the mess twice because when I put the new
screw in coolant went every where.  You might want to make sure your
system is not pressurized when replacing the bleeder screw.  Good Luck.
Neal

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.