Date:         Wed, 8 Jan 97 08:41:19 -0500
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Dave Mancuso <Mancuso@etown.k12.pa.us>
Subject:      Re: 5K on new heads....

>> Seems to run a little bit hotter with the new heads (or else it's just 
>> the dino oil). I've changed it once already, but I'm going back to 
>> synthetic (probably Mobil 1 again) at the 150K mark (6.5K miles from the 
>> head install).
>
>Just curious - did you use Mobil 1 since the van was new (and hence 
>the good shape of the pistons/cyls)?

I've used Mobil 1 since I bought the van (87K miles), and I've used Mobil 
1 on all of my cars (including 9 of my VWs) since the early-mid '80s.
The last car whose engine got "old" was my 412, but I used dino oil and 
didn't always change it when I should've.
Since I've been using Mobil 1 (any synthetic would work, I guess), I've 
never had an engine fail me, or even lose much compression. (although I 
haven't taken any of my cars or vans past 161K miles yet).
I swear the engine runs quieter (but I'm sure it's my imagination).

>> PS--I put new speakers in the front doors, which stick out 1/4 inch from 
>> the panels. I'm afraid to bend and break the window cranks, so I just 
>> loosened them a little and turn them carefully to avoid scraping the new 
>> speakers. Anybody have a better suggestion? Or should I warm the cranks 
>> up and try to bend them just a little bit?
>> 
>Autotech sells window crank spacer kits for $ 18, complete with 
>longer screws;
>
>part #
>99.837.9.155        WINDOW CRANK SPACERS                         
>18.00 
This is great. Thanks for the info!
--Dave Mancuso