Date:         Fri, 17 Jan 1997 17:38:53 -0400 (AST)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         smitht@unb.ca (Tim Smith)
Subject:      Re: Fridge/Pilot light viewfinder question

>> Pilot light viewfinder in fridge has been melted and patched with epoxy.
>> How would one know from there after if the fridge lights on gas?

Grab hold of the pilot light window 'viewfinder' gently with a pair of
pliers and twist/tug it out.  It's a plexiglass rod, about 2" long. Make it
flat at both ends by rubbing on a sheet of FINE sandpaper while holding it
upright.  When happy take some Brasso/Silvo or maybe even toothpaste and
polish the ends up nice and clear.  Then stick it back in and goop carefully
in place.  Tim

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.