>| I have a problem with my syncro. The thing vibrates at about 45mph on >| up. I removed the drive shaft, It checked out O.K. Without drive shaft >| installed, there is no vibration. HMMM? Sounds like you need a new driveshaft or to find a place that will rebuild the Universal joints on each end (very very hard to find was the consuses of the list). >| (Valentines day) We got snow, and I got stuck ( I forgot to mention that >| I just bought this thing. I'm familiar with 2wd Vanagons. Never owned a >| syncro) Real wheels spin, nothing happens up front. Did you reinstall the driveshaft? >| Am I correct to >| assume that I have a problem with my front diff.......possibly my >| viscous coupling? If you have reinstalled the driveshaft, it would be a fair assumption that either the VC or some other part of the front diff is hosed. I am not sure how to figure out if it is a diff problem or a VC except by opening things up. dave
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.