Don Parce wrote: > > On my 85 Westy, the black plastic resevoir that houses the faucet/pump > in the sink leaks. I can't find a replacement plastic housing, called > the tank, because the part is discontinued. I certainly don't want to > pay $200 for a new faucet/pump. > > Any ideas? > I had the same problem in my Syncro. There were several small cracks in the housing and one hose barb was broken off completely. I used a plastic bonding agent that melts plastic then bonds with it to form a material stronger than the actual plastic itself. This repaired the small cracks and I used a piece of plastic to surround the barb and adhere it back to the faucet. I have had no further problems with the unit. You can use some sort of super-glue or plastic bonding agent. I can't remember the name of the crap I used. -- ********************************************************************* _________________ | | Gary Norris: (|_________________|) '86 Volvo DL |\ \ | / /| '86 Cabriolet | \ \ | / / | '73 Thing | - \___________/ - | '87 Syncro Westy | 0 | | 0 | rnorris@wam.umd.edu |___|__|_____|__|___| "Never put off until tomorrow, what |__| |__| you can get someone else to do."
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.