Date:         Tue, 25 Feb 1997 15:04:39 -0500
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         olmcons@netinc.ca
Subject:      Re: ancillary gagues

Thoreau wrote:
> 
> where in the vanagon would be a good place to put a triple gague cluster..
> the place i would have used is whre the heater controls are...
> 
> i thought about to the right of the radio, but that would be hard to keep
> an eye on.. any suggestions.
> 
> thanks alot,
> 
> Stephen White
> 
>  93 Corrado SLC - 87 Scirocco 16v (hurt) - 84 GTi (dead) - 80 vanagon (?)
> ***************************************************************************
>      as long as you are looking for happiness, you will never find it
> ***************************************************************************
> spwhite@artsci.wustl.edu               http://www.artsci.wustl.edu/~spwhite
>                 CCA St. Louis Regional representative
 I put my triple gauges in an on dash cluster over the ash tray (after
removing it, the wires go down the hole and the cluster has been
modified to 'hang on to' the hole) on my 1983 Diesel.  I added oil
pressure, cylinder head temp. and voltage.  I am still trying to find a
good way to mount the cylinder head temp. sender.

Diesel John

The Smoking Tortoise