I was replacing the (broken) stereo on the '81 I got recently, and I noticed that the wire the PO ran to the stereo (aftermarket) goes hot when you INSERT the key into the ignition. You don't have to turn it. Should I connect to a different spot? Also, the VDO voltmeter I hooked up to the same wire shows about 10 volts whith the engine off, and about 12 with the engine on. My multimeter shows 12.34v with the engine off, and almost 14 with it on. Is the VDO gauge bad? TIA, and I'll read 'um when I get back. We are taking the Westie out for a real, live camping trip -- our first since we got it!!! Also the first time towing our little boat, using the bumper we had made (2" receiver integral to the bumper). If you are in the area, stop and say "HI." We will be at Parker Canyon Lake, near Sierra Vista, AZ. Thanks, Bill ---------------------------------------------------------- Remember, it ain't what you don't know that hurts you, it's what you do know that's wrong.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.