I'm in the stage to fill up the coolant system from complete dryness. Because the van is still jacked up on axle stands I can not raise the front. Also I guess I will keep a lot of bubbles in the engine and heater area. I have filled about half of the capacity. What should I do with the rest, pushing it under pressure into the cooling system (bleeding screw opened)? Or is this waste of time and I should wait until the engine runs to push the bubbles to the radiator? All suggestions are welcome Helmut '80 Camper
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.