As I reported earlier, pulling off the #3 wire from the distributor makes no difference how the engine runs. I checked the spark, and it is fine, so I suspected the fuel injector or wiring. First, I swapped the wires on #3 and #4, with no change. Then, I swapped the injector on #3 with the one on the #4. Again no change. I really don't know what to try now. Any suggestions will be appreciated and tried. Thanks, Bill ---------------------------------------------------------- Remember, it ain't what you don't know that hurts you, it's what you do know that's wrong.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.