Here I thought it would be so easy ... I took off the cover for the front turn indicator light, no problem. Next I melted the big ice cube out of it. On to remove the light bulb -- after getting off as much corrosion as possible from the bulb holder ... OK, the glass part of the bulb came out in one piece. But the metal bottom of the bulb is tightly stuck in there. I thought I'd disconnect the bulb holder from the wires holding it -- but no, those are corroded on as well. So, is there a way to get these wires loose from the bulbholder without breaking any delicate little metal parts? Love, Miz Lotus-Woman vwvan82@ptialaska.net < Zero cigarettes since 6-3-96 ...> "If you can't believe it's happening pretend it's a movie." ----- Andy Warhol -----
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.