> > Repairer says stud will be case hardened and drilling and using a stud > extractor will not work. I think it may. > > Can anyone help with practical how to do it I can't find anything in the > FAQ archives > > Thanks > > Jack Newton > Sydney Australia --Hi Jack: If there is no other way it is possible to take it to a machine shop that has a EDM (eiectrical discharge machine). The case will have to be disassembled. It will be no problem to burn out the stud and save the threads. With one of these machines it is even easy to get rid of a broken tap in aluminum without hurting the threads the tap had just cut. Todd Francis '86 Westy Syncro '91 Tristar
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.