How far should the clutch lever move when the clutch is pressed all the way in? When is it time to rebuild/replace my clutch cylinders? Any sure signs? I have had problems with my clutch since the dealer first replaced it. . . One thing that bugs me is the "linkage" between the clutch slave cylinder and the clutch lever seems to be missing. It was never complete since I have owned the van. It was kind of home rigged, and I don't know what the real setup looks like. Pictures in the Bentley are pretty vague. All there is now is a steel rod pushing on the ball on the clutch lever. I don't have another van around to look at nor do I know anyone else that owns one for me to get an idea from. Any help would be appreciated, thanks already. Gary Thaxter 74 transporter (panel) 85 Kombi looking at an 86 syncro
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.