Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 1997)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 13 Apr 1997 05:54:44 -0400 (EDT)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Garrick409@aol.com
Subject:      New way to bleed wasserboxer?

While checking for exhaust gases in my coolant, I got lots of air in the system. I have not enjoyed following the bleeding procedure in Bentley, kind of like doing taxes. Since I was by myself, I tried a different approach this time. Elevated the front of the van like before. Ran the engine and revved it up several times to make sure bubbles got circulated. A moderate bubble developed uder the expansion tank cap and I bled this bit by cracking open the cap just a touch and closed it just as fluid started running out.

Then I opened the bleeder screw on the radiator while the engine continued to idle. I found some small gauge nylon tubing(used for a oil presssure gauge in my Triumph) and created a syphon from a jug of coolant into the bleeder hole. The jug would rest against the windshield and a wiper by itself. The tube was small enough to let escaping air pass around it. When coolant started flowing out I just put the bleeder screw back in. The whole process took about 15 min but was a whole lot less spastic than the Bentley procedure. Seemed to work well. Does anyone know why this wouldn't work?

Garrick Chang Davis, CA


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.