>I have found a wet trail sourced at the top front and rear >head bolts on the passenger side(no apparent leak from top middle >bolt). >So if anyone's been there and done that on this, how do I fix it?? I had a similar leak on my 87 and fixed it successfully. Here's what I recommend: 1. Get new head nuts from the dealer. Don't reuse your old ones. 2. Drain coolant from engine. 3. Remove one of your leaky nuts, scrape away any old sealant and dry everything really well. 4. Apply the sealant, don't overdo it. Fel Pro bolt prep is what I used. 5. Torque new nut to specs (37 ft lb). 6. Repeat for the next leaky nut. 7. Let things sit for a while so that sealant sets. 8. Refill with coolant and bleed air from system. -Mark McCulley 87 syncro Westy
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.