Proper Tire Inflation for Even Wear Equipment needed: One piece of chalk 1>Draw a line across the treads of each tire. 2>Drive a few feet. 3>Look at line. 4>If line is worn in the middle,let out some air then goto step one. 5>If line is worn on edges, add air then goto step one. 6>If line is worn evenly your are done! Good Luck Ken Lewis On Thu, 1 May 1997 23:58:08 -0500 Laurie Loeb <lloeb@igc.apc.org> writes: >Sooooo, after all this discussion which pops up now and then, what are >proper inflation pressures for BFG Radial All Terrain T/A, size >27-850-14 on >a '91 Syncro Westy, loaded for a trip with one or two people, and >unloaded >around town? >
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.