The airflow box and the old Throttle position sensor on typ914s is a carbon track with a known resistivity per unit area. The wiper will eventually wear a groove in the track and then wear through the track to cause some degree of open circuit vs position. Open the airflow box and reposition the wiper to a new "track" region. Yep, it's a delicate little critter and yep you have to be careful. Now if it's just a grunge situation, a bit of electrical contact cleaner sprayed into the box whilst you move the vane manually will cure a host of problems. -- -- ___ / __ __/ ____/ Al Knoll HP Performance Technology / / / / / Center Roseville, CA, USA 95747 / _____/ / / 916.785.9453 (Telnet 785-9453) / / / / email: alf@hpptc38.rose.hp.com / __/ __/ ______/ ___________________________________/
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.