I used the Redline Water Wetter when I replaced the coolant after installing a new engine. The mechanic that replaced the engine used 100% anti-freeze as well. I think that the engine is running too cold. While replacing coolant with water when repairing leaks I would guess that I have mabye 33% water in the system now, and the guage still very rarely moves out of the white. Only if I let it idle for 20 min or so will the needle escape the white. The needle used to always be at the redlight. I am going to replace the coolant without using the water wetter. The Vanagon just has a huge cooling system that should have no problem cooling the engine. YMMV. Cory '86 Westfalia On Sun, 25 May 1997 RubatoGuy@aol.com wrote: > Has anyone tried this product? It is suppose to increase the heat transfer > properties of the radiator water and they claim up to a 30-degree drop in > water temp. Just curious if anyone has experience with this product. >
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.