Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 1997)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 02 May 1997 10:06:07 +0300
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         zeidler@NTCNTG02DU.ntc.nokia.com (Zeidler Helmut NTC/Dusseld.)
Subject:      Audi Turbo Rims - My Story

Hello all,

I guess you read my 'AUDI Turbo Rims - Warning' and you ask yourself, how I could send this information.

It starts while dismantling an AUDI 200 for the engine to put it into a Vanagon. I recognised that the bolt patterns of the nice looking rims will fit the van. The rims have a wrong offset, but this can be corrected by using 10 mm spacers. On German rights I will need a approval for using.

On February, 24th I sent my first letter to VW Wolfsburg for a certificate that the AUDI rims will fit the Vanagon. In fact, VW and AUDI are the same company. I got the first answer: AUDI got an independent company in 1993. I should ask over there.

On March, 3rd I sent my first letter to AUDI Ingolstadt. I got a short phone call: The rims doesn't fit. No more detailed information.

I know, the rims do fit and I called AUDI again, different person. I got a better information: AUDI was an subsidiary company of VW in 1982 when the rims were built. All development files are over there, I may call VW.

So I did, but different person as my first time. That I he answered me: Right, AUDI was a subsidiary of VW in 1982, but all development information were sent to AUDI when it got an independent company.

Back to AUDI. I found a very helpful person. He wants to try to get the technical file from the development department. This will need some time. After two week I called him again, he was in holidays, I should wait some more days and call again. I did, but he had bad news, no technical documentation were found on this rims. The approval of this rims were made in once with the car. I should send him a copy of the car license papers to find the right approval certificate. I happy to have the wreck still in my garage and the papers on hand. It sent them.

Finally, on April, 17th, I received an official letter from AUDI stated, that the rim is approved to carry 520 kg each and that this letter is intend to be used for an official approval.

Any comments?

Helmut '80 Camper

PS: For everyone, who needs this letter for an approval on this rims should send me an e-mail. I'm happy to send a copy of it if the recipient will pay the postage. Helmut.Zeidler@ntc.nokia.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.