Todd: I found terminals mislabeled while working on the radiator fan's relay. Double check (trace) the wiring to be sure. Good Luck Ken Lewis 86 crewcab 60 356 coupe On Fri, 6 Jun 1997 11:00:00 -0500 RubatoGuy@aol.com writes: > My first thought to test the rear wiper relay was to get a piece of wire with blade connectors at each end and connect terminals 53 and 15 on the relay - figuring that this should send power to the rear wiper. (I verified that there was 12V at one >terminal) > >Well, nothing happened,> >Todd >'88 Westy >
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.