Date:         Tue, 10 Jun 1997 11:35:18 -0600 (MDT)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Blake C. Thornton" <thornton@math.utah.edu>
Subject:      wiring harness, stalling

Well, yesterday my 84 died while going down the road around 40 mph.  It 
just cut out and died just as if I had turned off the ignition.  I turned 
the key a couple times before I came to a stop and it wouldn't start.  I 
pulled over and waited one or two minutes and it started right up.  There 
were no problems after this.

What I am wondering is, does this sound like the wiring harness fix that 
i've read about in the archives?  Is it worth spending the $100 for the 
harness if that is the problem?

thanks in advance for any help 

Blake

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.