Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 1997)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 25 Jun 1997 19:58:51 -0400
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Linda Bartnik" <lbart@preferred.com>
Subject:      gauges for a Vanagon

Hey all, I'm looking at putting at least two gauges in my '81, oil temperature and oil pressure. Maybe a voltmeter thrown in there for good measure or just 'cause I like gauges. I would get a tach but they are MUCHO expensive.

Anyway, the problem with the Vanagon dash is that there's not any good place to put extra gauges. I could put them to the right of the radio, but then they're out of my line of sight. I'm thinking of one of the 2 or 3 gauge clusters that RMMW sells mounted on top of the dash, over the speaker grille so I can still use my ashtray (I don't smoke but it makes a handy change holder). How do those gauge pods typically mount? Screws? Adhesive?

Also, I'd like to get VDO gauges but I want to get them from somewhere that has better prices than Motorworks. Buying all my gauges and senders and pods from RMMW would break the bank. Who's got good prices on VDO gauges and senders? Bus Boys? Bus Depot? Volks Cafe??

Regarding the oil pressure gauge, I see two offered in the RMMW catalog, one that goes to 80 psi and one that goes to 150. Which one should I get? How high does the oil pressure in the VW engine get, anyway?

I've done the oil temp gauge install before, so I don't need help with that but I'm new to oil pressure gauges. I know I will need a sender that will let me keep the stock oil light and some kind of adapter to clear the tin on the Type 4 engine. Any ideas here?

I know I will hear from David Schwarze on this :-) . Let me hear that gauge wisdom, oh gauge god!! You guys should see Dave's dashboard :-)

Could I locate the gauge cluster from a junked Rabbit and use those gauges?

Any and all help is appreciated. This installation probably won't happen for a little while anyway, but it's one of those things that I want to get done soon. Just need money :-)

Then there's the aux. battery -- that'll be fun to work out.....

Thanks folks, Sean


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.