Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 1997)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 11 Jul 1997 16:16:18 PDT
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "adam grove" <malchik_2@hotmail.com>
Subject:      Re: Insulation for a vanagon ...

>In a message dated 97-07-09 22:01:58 EDT, jmates@ichips.intel.com (John >Mates) writes: > ><< I'd really like some advice on what sort of insulation to use. > I want convenience and neatness of installation, I want good > insulating properties (sound, and heat.) >> > >John (and others) > >I'm sure others can add more to this, but be carefull with polyurethane, it >will keep expanding for some time during installation and can expand enough >to destroy your panels, but more imporant, in a fire it is DEADLY... DO >NOT hang around if it catches fire!!! > >Fiberglass and rockwool can add a lot of irritants in the air for you to >breathe. The movement of the van while on the road can constantly shed tiny >fiber particles that find their way out of any crack. > >Those are my only two known problems, but don't take my word on it, there are >many types of insulations and many ways to apply them. I'm hoping others >will have more to say about this.............. > >And while we're on the subject, I'm interested if anyone has experimented >with ways to increase the efficiency of the AC by treating the windows with >coatings, films or shades. I have the stock Westy windows in an 87 GL >Syncro. Any ideas??? > >Curt Long > >Curt,

A long time ago when we lived in Arizona my wife and I tinted the windows in our 74 Westy with this adhesive film. It went on easily (make sure the window is clean!) and really helped keep the vehicle cooler. Just make sure you don't put real dark stuff on the rear window or the front side windows - it is hard to see out at night.

Since we now live in Alaska, I also pursued the insulation quest. I glued 1/2 inch closed cell foam (carpet pad type) on the inside of the fiberglass poptop (just in the valleys)and then took 1/4 inch masonite coated with white plastic film (used as shower enclosure liners) and glued it with "liquid nails" to the ridges. It has been up there for 6 years now and works great. No more condesation on the roof! (we added a roof vent too which can help that problem too.)

I also took the same foam pad and lined the two front doors on the inside and the entire front panel under the dash etc - deadened sound and made it warmer.

Good luck,

Adam Grove

74 Westy 91 Syncro (in bound from lower 48)

_______________________________________________________ Get Private Web-Based Email Free http://www.hotmail.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.