Date:         Mon, 14 Jul 1997 07:28:04 -0700 (PDT)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Ivan Boyd <boyd@unm.edu>
Subject:      Re: Insulation for a vanagon ...

I had all the windows tinted on my '85 Westi and it makes a big difference
in the heat in the car.  A good side effect is that it cuts UVA/UVB by
~96%.  I would definitely do it again.

Ivan

On Fri, 11 Jul 1997 JCSYNCRO@aol.com wrote:

> Date: Fri, 11 Jul 1997 17:52:33 -0500
> From: JCSYNCRO@aol.com
> To: Multiple recipients of list <vanagon@lenti.med.umn.edu>
> Subject: Re: Insulation for a vanagon ...
> 
> In a message dated 97-07-09 22:01:58 EDT, jmates@ichips.intel.com (John
> Mates) writes:
> 
> << I'd really like some advice on what sort of insulation to use.
>  I want convenience and neatness of installation,  I want good
>  insulating properties (sound, and heat.) >>
> 
> John (and others)
> 
> I'm sure others can add more to this,  but be carefull with polyurethane, it
> will keep expanding for some time during installation and can expand enough
> to destroy your panels,  but more imporant,  in a fire it is DEADLY...  DO
> NOT hang around if it catches fire!!!
> 
> Fiberglass and rockwool can add a lot of irritants in the air for you to
> breathe.  The movement of the van while on the road can constantly shed tiny
> fiber particles that find their way out of any crack.
> 
> Those are my only two known problems, but don't take my word on it, there are
> many types of insulations and many ways to apply them.  I'm hoping others
> will have more to say about this..............
> 
> And while we're on the subject,  I'm interested if anyone has experimented
> with ways to increase the efficiency of the AC by treating the windows with
> coatings, films or shades.  I have the stock Westy windows in an 87 GL
> Syncro.  Any ideas???
> 
> Curt Long
> 
>