> there's a screw or two inside those buggers, but I can't figure out > how they disassemble. Do they "fall" apart when the window is > removed? There's a single screw that is accessible from the bottom. You need some sort of flexible or right angle flat blade screwdriver to get it out. A mechanic's mirror helps to see what you're doing. I didn't have one of those screwdrivers, so I bent up a big bobby-pin and unscrewed it that way. Once you get that out, the latch falls off along with the spring. Then you have access to the parts that go through the window, which are held on by 2 screws. Regards, -Karl Karl F. Bloss - blosskf@ttown.apci.com '87 Vanagon GL Weekender "Beverley" http://www.enter.net/~bloss/vw/
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.