Since the list went down I've 1. Had a broken release bearing shaft 2. Replaced the calipers and had them heat up to sizzling. 3. Replace the Master cylinder and the booster and the whole mess under the dash. 4. Had a stripped bleeder hole on a rebuilt caliper. 5. Now I have an intermittent cutting out during in-town driving. I've read the archives on intermittent missing, and wonder if there is anything anyone can add. This isn't the kind of cutting out that makes me stop by the side of the road. It only lasts a second or so and then starts up. I really wanted to take a trip to Pennsylvania next week, but we've cancelled it becuausse of all these troubles making us not trust the van. Any advice is welcome. -- Gerry Gerald Skerbitz <gsker@med.umn.edu> U of MN Med School Admin 6-5379 Home St. Paul,Ramsey County,Minnesota, USA
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.