Hi all, My mirrors would always collapse in over time. I originally corrected by tightening the nut (after taking the mirror off the van) under the mounting bracket. This works until it eventually pulls the bolt out of the round ball. After that I drilled a hole all the way through the mounting bracket in the same axis as the original bolt. Where the hole pops out the top of the bracket, countersink a hole into the plastic and then use a stainless bolt and nut to hold the mirror as tight as you want. No problem since then, Kerry '86 syncro 157k
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.