Date:         Mon, 25 Aug 1997 18:27:27 EDT
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Sean Bartnik <sbart7kb@WWW.MWC.EDU>
Subject:      door handle fixed

Hey all,
I seem to have fixed the sliding door handle problem I was experiencing.

I removed the inside door handles, and then pulled off the door panel.
I found a loose screw on the latch/lock assembly that had managed to
back itself out quite a bit.  I assumed that this had something to do
with it, and so inserted the handle/lock assembly all the way in, then
tightened down the loose screw.  that seems to have done the trick as
the door handle now works like it's supposed to.  Also, it doesn't pull
out of the door anymore, which makes me happy :-)

So whatever that screw did, I think tightening it fixed the problem.

Sean
--

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.