Date:         Tue, 12 Aug 1997 19:41:16 -0400 (EDT)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         WestyLuvr@aol.com
Subject:      Re: No spark in the Digifant

In a message dated 97-08-12 19:08:08 EDT, you write:

<<   brings me to the Hall sender  I tried testing it with a
 multimeter(digital Fluke 77) but didn't get a blip. Bentley says to use a
 digital probe.  I also did the ground the center lead of the plug to the
 hall center to get 4.5Volts across the coil and didn't get change in
 voltage.  >>

A little clarification.  Did you check the power supply to the hall unit or
just the hall sender itself?  If you didn't get a blip from the hall sender
itself that is the faulty part not the control unit.

Chris
86  Westy

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.