Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 1997)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 6 Aug 1997 13:26:43 -0700
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Erik Rhodes <ErikRhodes@platsoft.com>
Subject:      RE: A Stretching Clutch Cable?

Yeah, there is a flex tube under there and the bracket that holds it to the car looks broken, someone's put a clamp around it to hold the tube against the car. Dan, you're a kind man--this must be it!

>From the looks of it, the little bracket is welded on one side to the car and the other end the boden tube is held by it, but the bracket it broken in between where it is welded to the car body and where it holds the tube. Is this as simple as getting it welded? Seems like there'd be a lot of tension on the bracket, it's a pretty whimpy lookin' little thing.

> ---------- > From: Dan Moy[SMTP:danmoy@home.cynet.net] > Sent: Wednesday, August 06, 1997 12:47 PM > To: Multiple recipients of list > Subject: Re: A Stretching Clutch Cable? > > I do not remember if a 79' has a boden tube (tube the guides the cable > to > the clutch arm) or not. But you might want to check it to see if is at > the > proper angle and or not worn (coils in the tube might be stretched or > bent, when you have these problems. > > I have owned beetles for many years and have replaced > a number of boden tubes as a result of many types of clutch/shifting > problems. > > Let me know the result. > Dan > > > On Wed, 6 Aug 1997, Erik Rhodes wrote: > > > In my '79 Westphalia, I notice that on hot days (I swear this > > doesn't happen in cooler weather!) after driving and the engine > getting > > hot, the clutch cable will grow too loose, making it grind when I > try to > > go into reverse. I'll crawl under and tighten it, everything seems > > fine, and then a few days later the same thing will happen. > > > > The weird thing is this: I've had the cable replaced recently, > > same problem. AND, it can be really bad on a hot day, grinding when > I > > try to get it into gear, but if I leave it be and drive it the next > day, > > it's fine, not too loose at all. > > > > If it's just a stretching cable, why would it be out of > > adjustment one day and then not the next? And what the heck could > the > > hot day have to do with it? > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.