On Wed, 10 Sep 1997, Scott Semyan wrote: > It depends on what part of the emissions test you failed. In WA they > check CO and Hydrocarbons at idle and under load. Ditto! for California, only you can add NOX testing too! for SMOG2 > 1) Test the engine when it is good and hot. Right off the highway if > possible. The cadilytic (sp?) converter works best when it is hot. The Catalytic Converter ONLY works when it's HOT! > Try things that will increase the O2 like getting a high flow air filter > or temporarily removing the tube that redirects crankcase emission back > into the air intake. A No-No in Cal. Although this change in the physical structure of your emission system produces less emissions, you'll fail the mehanical portion of the inspection. All original smog abatement equipment MUST be present, in it's original place. Chris San Diego |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.