Derek, Its not all that critical as long as itfits where you want want it Radio Shack is an excelent sorce for the colored diodes Just to be sure try to measure the votage at the conecting wires to give you some Idea (it will be very low) also make sure that the diode is put in with corect end/wire to ground as they are Directional and wont work the wrong way Dave WR3I 97evc Derek Drew wrote: > The red low water diode in my refrigerator light indicator panel is > out. > Does anybody know what kind of diode I should solder in there to > replace this? > ___________________________________ > Derek Drew New York, NY > drew@interport.net
-- MZ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.