Date:         Mon, 29 Sep 1997 21:09:56 -0400
Reply-To:     "John H. Fleming" <JFleming3@COMPUSERVE.COM>
Sender:       Vanagon mailing list <Vanagon@Gerry.SDSC.EDU>
From:         "John H. Fleming" <JFleming3@COMPUSERVE.COM>
Subject:      Re: 85 westi engine questions
Comments: To: Robert Williams <williams@mtest.teradyne.com>
Content-Type: text/plain; charset=ISO-8859-1

you wrote:
>John,

  Looking at Helmut's pictures it appears that the Subaru engine requires 

modifying the engine cover to raise it up about 2 inches. This is not
compatable with using the lower bed. Does the Kenndy kit need this
modification?

Bob
> 


I don't believe Helmut's picture is the 2.2 Legacy.  KEP's pictures show
that no cover modification is needed.  However, the oil pan sits 2 inches

lower than stock.  I am thinking about a skid plate if it's too low. 


John Fleming
 85 Westy

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.