Date: Sun, 9 Nov 1997 23:32:07 -0500
Reply-To: CanineWolf@AOL.COM
Sender: Vanagon mailing list <Vanagon@Gerry.SDSC.EDU>
From: CanineWolf@AOL.COM
Subject: Fwd: U-JOINTS FOR SYNCROS =)!!!!!!!!!!?!!!!!!!!!
---------------------
Forwarded message:
Subj: U-JOINTS FOR SYNCROS =)!!!!!!!!!!?!!!!!!!!!
Date: 97-11-02 23:00:23 EST
From: CanineWolf
To: Vanagon@gerry.sdsc.edu
---------------------
Forwarded message:
Subj: U-JOINTS FOR SYNCROS =)!!!!!!!!!!?!!!!!!!!!
Date: 97-11-01 15:23:13 EST
From: CanineWolf
To: Vanagon@gerry.sdsc.edu
In a message dated 97-11-01 00:58:04 EST, CanineWolf writes:
<< Vanagon@gerry.sdsc.edu >>
---------------------
Forwarded message:
Subj: U-JOINTS FOR SYNCROS =)!!!!!!!!!!?!!!!!!!!!
Date: 97-11-01 00:58:04 EST
From: CanineWolf
To: Vanagon@gerry.sdsc.edu,N E JAZZ 2
In a message dated 97-10-31 17:39:04 EST, CanineWolf writes:
<< Vanagon@gerry.sdsc.edu >>
---------------------
Forwarded message:
Subj: U-JOINTS FOR SYNCROS =)!!!!!!!!!!?!!!!!!!!!
Date: 97-10-31 17:39:04 EST
From: CanineWolf
To: Vanagon@gerry.sdsc.edu
Well everyone as fate has it I've found away around vw once again...as many
of us have. U-Joints for Germany that I really cant remeber his name but he
makes most of the u-joints in germany. So with a lucky guess from CT
driveshaft I have new u-joints.....
Part
Neapco (an american company) (power train components)
1-0321
the grese fitting do not work on the syncros driveshaft but with a handy
dandy 8mm fine thread bolt your in business=)...........
now one prob with mine was I needed to get the driveshaft balanced because I
totally froze up both u-joints.......all together it costed me 84 for the
balanceing and each
u-joint was 16.88 a piece=) hell of a bargin from 1000.
Now one prob is my driveshaft is fine and all and the ujoints fit great but I
have this annoying shakeing problem......maybe I screwed up my vicous
coupling when I blew the u-joints I drove all of South Dakota and Nebraska
without fixing them because I didnt know what was wrong with the van and no
vw's places out there. Also now the vibration only happens when the
driveshaft is in place so im wondering if the vicouse coupling turns all the
time or only when the driveshaft is in place...any help would be
nice...............
oh and on a funny note the u-joints are comparatable, according to ct
driveshaft, to a farm tractors u-joints......
thanx again and good luck=)
tim g
87 gl syncro