Hi all: It appears that the woven steel-wire cable which connects to my right heater control flap is stretched; at least it looks that way, though that doesn't seem possible. The manual is not at all clear on how the two control cables eventually connect up to the control lever. Do they meet somewhere and connect to one cable that runs up to the control lever, or do both somehow attach directly to the lever? The manual also says the way to get the trim plate covering the levers off is to "ply with a screwdriver." Do I need to remove the instrument cluster to work on the cable/lever connections after "plying?" --------------------------------------------------------------------- Tom Young young@sherlock.SIMS.Berkeley.EDU Lafayette, CA 94549 '81 Vanagon --------------------------------------------------------------------- |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.