On Mon, 8 Dec 1997 12:54:34 EST Sean Bartnik said: >Tell me, does the Vanagon have an adjustment for the vent wing? Mine is >an '81 if that matters. yeah, but it is a BITCH to get to. :( is up inside the door, accessible only after you've taken off the door panels and vapor barrier plastic sheet. on the bottom of the vent wing pivot, there is a hidden-inside-the-door clamp, with a phillips-head screw. you have to tighten that screw. the hard part is you have to have a tiny L-shaped screw driver (or one of those S-shaped ones from Sears), cause nothing else will reach up in there. :( and you'll likely need a mirror and a flashlight to even see the thing. but it CAN be done. it'll take a while to find it and figure out how you can tighten it, but it can be done. good luck. joel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.