Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 1997)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 2 Dec 1997 11:11:09 -0500
Reply-To:     Derek Drew <drew@INTERPORT.NET>
Sender:       Vanagon mailing list <Vanagon@Gerry.SDSC.EDU>
From:         Derek Drew <drew@INTERPORT.NET>
Subject:      Re: Binding when turning (syncro)
Comments: To: "Steven X. Schwenk" <sxs@concentric.net>
Content-Type: text/plain; charset="us-ascii"

I too have noticed an improvement in my binding problem since replacing a particularly worn front tire. Jury still out on my VC though. Setting air pressures exactly equal in all four tires also seemed to help.

At 09:07 PM 11/30/97 -0800, you wrote: >Back a month or so ago i posted a plea for help when i noticed that my >90 syncro westy was binding much more than "normal" when i made very >tight turns, like turning around in a parking lot. It seemed to really >bind....and the vehicle would not roll. i noticed this after a long hot >drive...something certainly seemed to be wrong. > >i got numerous replies...some pronouncing my VC dead. most advised to >check tire sizes, which i did....and to my surprise, one front tire had >slightly more tread than the other...since, as i now remember....i hit a >bolt in the road and had to replace one tire soon after i got the set. >Anyway, i put on four new tires since the old ones had over 40,000 miles >on them. i also had the cv joints lubed and the van aligned at the >porshe/vw dealer (they are the only ones who get it right) > >the problem seems to be gone. there is almost no binding when turning >tightly now, not even the amount that i used to consider "normal." in >fact, there is so little, or seemed to be none, that i was concerned >that the vc was not working...but then i took it out in about 14" of >snow....and oh yes....those front wheels were turning just fine... > >my guess is that it was the tires...i do not know what lubing the cv >joints would have to do with it since this was just routine maitenance >and they seemed to be working fine. i only hope the problem is gone for >good. the real test will be how it behaves after 5 hours on the road >when its 90 degrees out. > >thanks to all who responded to my initial post. > >steve... >'90 syncro westy > > ______________________________________________________ Derek Drew New York, NY & Washington, DC drew@interport.net '90 Syncro Westfalia... ...seen off-road at http://www.tiu.net/~des/vw/drew/index.html


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.