Date:         Sun, 7 Dec 1997 13:23:34 -0800
Reply-To:     David Bayer <bayer@SYBASE.COM>
Sender:       Vanagon mailing list <Vanagon@Gerry.SDSC.EDU>
From:         David Bayer <bayer@SYBASE.COM>
Subject:      Redline Oil?

Hello-
        Has anyone had problems with Redline's 10-40W oil not producing
enough pressure above 2000 rpm? Does anyone know if the .9 bar switch (or the
L board) has any type of delayed reaction. I just did the heads and replaced
the .9 switch while I was at it and now it seems that the light and buzzer
go off if I maintain > 2000rpm for more than say 10 seconds or so, fine at
idle and fine for revs and fine for brief excursions into the region the
.9 switch watches...

dave

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.