Date:         Mon, 8 Dec 1997 12:31:22 CST
Reply-To:     Joel Walker <JWALKER@UA1VM.UA.EDU>
Sender:       Vanagon mailing list <Vanagon@Gerry.SDSC.EDU>
From:         Joel Walker <JWALKER@UA1VM.UA.EDU>
Subject:      Re: vent window adjustment
Comments: To: Sean Bartnik <sbart7kb@WWW.MWC.EDU>
In-Reply-To:  <Vanagon%1997120810041917@GERRY.SDSC.EDU>
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 8 Dec 1997 12:54:34 EST Sean Bartnik said:
>Tell me, does the Vanagon have an adjustment for the vent wing?  Mine is
>an '81 if that matters.

yeah, but it is a BITCH to get to. :(  is up inside the door, accessible
only after you've taken off the door panels and vapor barrier plastic sheet.
on the bottom of the vent wing pivot, there is a hidden-inside-the-door
clamp, with a phillips-head screw. you have to tighten that screw.

the hard part is you have to have a tiny L-shaped screw driver (or one of
those S-shaped ones from Sears), cause nothing else will reach up in there. :(
and you'll likely need a mirror and a flashlight to even see the thing.

but it CAN be done. it'll take a while to find it and figure out how you
can tighten it, but it can be done.  good luck.
joel