Date:         Wed, 17 Dec 1997 11:57:05 -0600
Reply-To:     Jerry Wallace <jwallace@PROPTECH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.sdsc.edu>
Comments:     RFC822 error: <W> Incorrect or incomplete address field found and
              ignored.
From:         Jerry Wallace <jwallace@PROPTECH.COM>
Subject:      Re: Dead VC
In-Reply-To:  <Pine.SOL.3.96.971217121532.12678B-100000@yoda> from "Joe" at Dec
              17, 97 12:22:53 pm
Content-Type: text/plain; charset=US-ASCII

According to Joe:
>
> On Wed, 17 Dec 1997, Don Gibbons wrote:
>
> > Can any one with a working syncro put an arm type torque wrench
> > (no clickers) on a front wheel with the others on the ground and
> > get a reading. This would be a great way to tell the condition
> > of the VC !!
>
>      Great idea!   The problem is in order to compare readings
>      you must ether have the torque wrench in the center somehow
>      on the center nut??
>      Or you must be very specific as to how the reading is  taken.
>      See below as to what lug you may put the wrench on and what
>      angle!
>                  x
>
>           x             x________________
>
>
>              x       x

Since I have such a torque wrench but don't have a syncro, I'll
offer the use of the wrench to any syncronaut willing to stop near
the fairgrounds in the Minneapolis/Saint Paul area.
--
Jerry Wallace                             <jwallace at proptech dot com>

'93 EV MV (the Yuppie Microbus)