Date: Thu, 11 Dec 1997 15:52:47 -0800
Reply-To: "L-Soft list server at Vanagon List (1.8c)"
<LISTSERV@GERRY.SDSC.EDU>
Sender: Vanagon Mailing List <Vanagon@Gerry.SDSC.EDU>
From: "L-Soft list server at Vanagon List (1.8c)"
<LISTSERV@GERRY.SDSC.EDU>
Subject: Re: engine swap (ignorant questions) -> EV piston slap
>>>> STOP THIS !!!!!!!!!!!!!!!!!
>>> You are not authorized to use the STOP command.
>> Unknown command - "YOU". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>> L-Soft list server at Vanagon List (1.8c) wrote:
>>> Unknown command - "L-SOFT". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> All Audi I-5 engines I've seen fitted to Audi 4K, 5K, 80, 90, 100, 200,
>>>>>
>>>>> > Unknown command - "ALL". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> and VW Quantum are canted at approx 15-20 degrees.
>>>>>
>>>>> > Unknown command - "AND". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> rb
>>>>>
>>>>> > Unknown command - "RB". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> ----------------------------
>>>>>
>>>>> > Unknown command - "----------------------------". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> Scot wrote:
>>>>>
>>>>> > Unknown command - "SCOT". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> I don't believe "Piston Slap" is HYPE, as it was claimed. I have a
>>>>>
>>>>> > Unknown command - "I". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> question about the angle of the inline 5 as it is used in the Audi; do
>>>>>
>>>>> > Unknown command - "QUESTION". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> the pistons travel vertically, or is there some angle set from
>>>>>
>>>>> > Unknown command - "THE". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> vertical? I know from my EV that the engine is on an angle and if the
>>>>>
>>>>> > Unknown command - "VERTICAL?". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> >> engine was designed to run upright, there is a very good chance of
>>>>>
>>>>> > Unknown command - "ENGINE". Try HELP.
>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>
>>>>> All subsequent commands have been flushed.
>>>>>
>>>>> Your message did not contain any command. Note that lines starting with a
>>>>> "greater than" sign ('>') are ignored.
>>>>>
>>>>> Summary of resource utilization
>>>>> -------------------------------
>>>>> CPU time: 0.015 sec
>>>>> Overhead CPU: 0.000 sec
>>>>> CPU model: 2x90MHz Pentium (64M)
>>>> --
>>>> http://www.zstarr.com/impex
>>> Your message did not contain any command. Note that lines starting with a
>> Unknown command - "YOUR". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>> "greater than" sign ('>') are ignored.
>> Unknown command - ""GREATER". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>> Summary of resource utilization
>> Unknown command - "SUMMARY". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>> -------------------------------
>> Unknown command - "-------------------------------". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>> CPU time: 0.016 sec
>> Unknown command - "CPU". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>> Overhead CPU: 0.000 sec
>> Unknown command - "OVERHEAD". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>> CPU model: 2x90MHz Pentium (64M)
>> Unknown command - "CPU". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>> Your message did not contain any command. Note that lines starting with a
> Unknown command - "YOUR". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
All subsequent commands have been flushed.
Your message did not contain any command. Note that lines starting with a
"greater than" sign ('>') are ignored.
Summary of resource utilization
-------------------------------
CPU time: 0.078 sec
Overhead CPU: 0.000 sec
CPU model: 2x90MHz Pentium (64M)