Date: Thu, 11 Dec 1997 15:52:49 -0800
Reply-To: "L-Soft list server at Vanagon List (1.8c)"
<LISTSERV@GERRY.SDSC.EDU>
Sender: Vanagon Mailing List <Vanagon@Gerry.SDSC.EDU>
From: "L-Soft list server at Vanagon List (1.8c)"
<LISTSERV@GERRY.SDSC.EDU>
Subject: Re: engine swap (ignorant questions) -> EV piston slap
>>>>> STOP THIS !!!!!!!!!!!!!!!!!
>>>> You are not authorized to use the STOP command.
>>> Unknown command - "YOU". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>>> L-Soft list server at Vanagon List (1.8c) wrote:
>>>> Unknown command - "L-SOFT". Try HELP.
>>> Unknown command - "UNKNOWN". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> All Audi I-5 engines I've seen fitted to Audi 4K, 5K, 80, 90, 100, 200,
>>>>>>
>>>>>> > Unknown command - "ALL". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> and VW Quantum are canted at approx 15-20 degrees.
>>>>>>
>>>>>> > Unknown command - "AND". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> rb
>>>>>>
>>>>>> > Unknown command - "RB". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> ----------------------------
>>>>>>
>>>>>> > Unknown command - "----------------------------". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> Scot wrote:
>>>>>>
>>>>>> > Unknown command - "SCOT". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> I don't believe "Piston Slap" is HYPE, as it was claimed. I have a
>>>>>>
>>>>>> > Unknown command - "I". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> question about the angle of the inline 5 as it is used in the Audi; do
>>>>>>
>>>>>> > Unknown command - "QUESTION". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> the pistons travel vertically, or is there some angle set from
>>>>>>
>>>>>> > Unknown command - "THE". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> vertical? I know from my EV that the engine is on an angle and if the
>>>>>>
>>>>>> > Unknown command - "VERTICAL?". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> >> engine was designed to run upright, there is a very good chance of
>>>>>>
>>>>>> > Unknown command - "ENGINE". Try HELP.
>>>>>> Unknown command - "UNKNOWN". Try HELP.
>>>>>>
>>>>>> All subsequent commands have been flushed.
>>>>>>
>>>>>> Your message did not contain any command. Note that lines starting with a
>>>>>> "greater than" sign ('>') are ignored.
>>>>>>
>>>>>> Summary of resource utilization
>>>>>> -------------------------------
>>>>>> CPU time: 0.015 sec
>>>>>> Overhead CPU: 0.000 sec
>>>>>> CPU model: 2x90MHz Pentium (64M)
>>>>> --
>>>>> http://www.zstarr.com/impex
>>>> Your message did not contain any command. Note that lines starting with a
>>> Unknown command - "YOUR". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>> "greater than" sign ('>') are ignored.
>>> Unknown command - ""GREATER". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>> Summary of resource utilization
>>> Unknown command - "SUMMARY". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>> -------------------------------
>>> Unknown command - "-------------------------------". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>> CPU time: 0.016 sec
>>> Unknown command - "CPU". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>> Overhead CPU: 0.000 sec
>>> Unknown command - "OVERHEAD". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>>> CPU model: 2x90MHz Pentium (64M)
>>> Unknown command - "CPU". Try HELP.
>> Unknown command - "UNKNOWN". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
>>> Your message did not contain any command. Note that lines starting with a
>> Unknown command - "YOUR". Try HELP.
> Unknown command - "UNKNOWN". Try HELP.
Unknown command - "UNKNOWN". Try HELP.
All subsequent commands have been flushed.
Your message did not contain any command. Note that lines starting with a
"greater than" sign ('>') are ignored.
Summary of resource utilization
-------------------------------
CPU time: 0.047 sec
Overhead CPU: 0.000 sec
CPU model: 2x90MHz Pentium (64M)