At 10:15 PM 2/25/98 -0500, you wrote: > I changed the tranny oil in my 85 last weekend, and made a bit of a >discovery: > > Lo and Behold! There was the answer: A head nut! It is the right >size hex, deep enough that I could get it into each of the plugs while >turning with a 17mm combo wench, and shallow enough to not bump into the >exhaust pipe or interfere with the shift rod. > VW Lug bolts (male) also work - just thread on two nuts and tighten against each other; insert head in hex bolt, wrench on the nuts. Austin |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.