I just posted information about the input shafts last night. Please look at http://www.relitech.com/tomc/vanagon2.htm for pictures of the differences between the shafts. TomC tcarrington@relitech.com http://www.relitech.com/tomc/tomvw.htm > On Tue, 17 Mar 1998, Don Gibbons wrote: > > > I did this. But I had a diesel vanagon and a rabbit Gti as the > donor. As long as > > the vanagon is water cooled there are no significant differences. > Here is a list > > of diesel parts you will need: > > > > bell housing or whole transmission > > > (snip) > > If you're just using the bellhousing, I believe you'll need to use the > diesel tranny's output shaft also to mate with pilot brg etc. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.