You may not notice it, but automatics consume more power than manuals. This extra power consumption comes from heat generated by shearing transmission fluid in the torque converter. The fact that heat exchangers are installed on automatics and not manuals is a testament to the extra heat generation. For low speed crawling or heavy campers in stop and go traffic, the auto is probably the ideal choice, but for serious highway miles, I would go with a manual. I'm not sure if the VW auto has a lockup torque converter, but if not, its a bad choice for highway miles. Then there is the fact that the manual has at least 4 forward gears while the auto has three. The gears in the automatic are spaced out further resulting in extra strain on the motor. Of course, a lot of the strain is taken care of by the slip in the torque converter, which results in more heat..... The auto is apparently pretty efficient, as list people say they can't tell a difference between the two. However, the automatic still consumes more power. Extra heat is generated by the automatic transmission, and this requires additional power consumption, assuming the laws of thermodynamics are valid. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.