Date:         Fri, 20 Mar 1998 17:16:53 -0700
Reply-To:     "D.Belick" <mmoguls@HOOKED.NET>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         "D.Belick" <mmoguls@HOOKED.NET>
Subject:      diesel beelhousings vs gas (for swaps)
Comments: To: Vanagon@vanagon.com
Content-Type: text/plain; charset="us-ascii"

Hi Volks,

There was a recent post(sorry, I've lost your name) that inferred the input
shaft from a gas engined vanagon could be used in the Jetta/GTI swaps.  Can
anyone verify for me that the standard vanagon bellhousing/input shaft
combo will work if the shaft is shortened?  By how much?  Is the bolt
pattern the same?

thanks in advance,

Dan

84 Adventurewagon

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.