Date:         Sat, 21 Mar 1998 07:09:24 -0500
Reply-To:     Dan Moy <avt@HOME.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Dan Moy <avt@HOME.COM>
Subject:      Re: Vanagon clutch chatter
Comments: To: Gary Shea <shea@GTSDESIGN.COM>
Comments: cc: Vanagon@VANAGON.COM
Content-Type: text/plain; charset="us-ascii"

My clutch always chatters, I am considering putting in a new clutch /
pressure plate.  Did you cut your flywheel before you installed your new
clutch?

Dan




Gary Shea <shea@GTSDESIGN.COM> on 03/21/98 12:56:10 AM
Please respond to Gary Shea <shea@GTSDESIGN.COM>
To:     Vanagon@VANAGON.COM
cc:
Subject:        Re: Vanagon clutch chatter

On Fri, 20 Mar 1998, Frank LaHorgue wrote:
> Greetings:
> I have checked this subject in the archives.  Is my conclusion correct
that
> many Vanagon owners with Canadian VW replacement clutches are having
> chatter problems?  Has anyone been able to correct the problem or get
> satisfaction from VW?
>
> Thanks for any information on this annoyance -- Frank LaHorgue

Wow, you mean I'm not the only one whose van bounces up and down
once the clutch warms up?  I don't think I have a Canadian clutch,
but then again I'm not sure... I seem to remember both the clutch
plate and pressure plate being Sachs items, but I'm not positive.
I replaced the whole mess when I did an engine rebuild a couple
of years ago.

I've always had the clutch chatter, no matter what parts are in
there!

        Gary

-----------------------------------------------------------------
Gary Shea                                       shea@xmission.com
Salt Lake City                      http://www.xmission.com/~shea