Date:         Mon, 30 Mar 1998 14:10:14 -0500
Reply-To:     Michael Sullivan <sullivan@OPENMARKET.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Michael Sullivan <sullivan@OPENMARKET.COM>
Organization: Open Market
Subject:      Re: Projectzwo Bullbars
Comments: To: Vanagon@VANAGON.COM
Content-Type: text/plain; charset=us-ascii

I think you "could" mount them just about anywhere, but that would
require drilling! If you look closely at the two pictures on my webpage
you can just make out two bolt holes provided on the main bumper directly
underneath cross tube. I would use those mounting points.

Cheers,
MJS



Kevin J. Turinsky wrote:

> Michael:
>
> Considering your new bullbars: I've always wanted to mount my driving
> lights up higher, off the bumper (more at the same level as the
> headlights). Do you think it would be possible to mount them on the
> top-side of the highest cross tube? Do you think that would be a good
> position for them?
>
> Green with bullbar envy,
>
> Kevin...turinsky@juno.com
> "Anchored, down in Anchorage---Alaska"
> 61:10:42 North
> 149:11:11 West
> Elevation: 101 feet
>
> _____________________________________________________________________
> You don't need to buy Internet access to use free Internet e-mail.
> Get completely free e-mail from Juno at http://www.juno.com
> Or call Juno at (800) 654-JUNO [654-5866]



--
Michael J. Sullivan
Director of Catalog Design
Open Market Inc.
******************************************
   work: http://www.openmarket.com
   play: http://www.hsdesign.com
******************************************